February 04, 2015
Automobile steering system common fault is mainly: the steering wheel
rotation is too large and manipulation of the instability, the front
wheel, steering the heavy head, wandering. Steering wheel transport is
too large, unstable manipulation check steering pump ball head, the
place such as the king pin and bushing, wheel bearing wear, such as
severely worn or clearance overrun. Repair should be adjusted. If no
excessive wear or clearance, you should check: first, the abrasion of
steering worm gear and worm, or clearance is in accordance with the
provisions, such as the large clearance should be adjusted; Second, wear
parts of the steering device together, or whether to adjust too loose;
Third, the redirect or installation parts loose; Fourth, the steering
arm loose.

When the car running deviation, can check the following: whether the
tire pressure is equal to or tire diameter are equal; Whether the wheel
bearing side too tight; On both sides of the spring steel plate is
uneven stretch or deformation; Before the beam is correct, camber Angle
are equal; Steering knuckle arm, steering knuckle for bending or
deformation; Rear axle shaft for bending tube; Wheel base on both sides
are equal.

Check the wheel dynamic balancing. Tire assembly is correct, check
whether the tire wear uniform, check the balance block assembly is
correct. Check the wheel rim for deformation; The deflection of wheels
for lateral or radial swing; Shock absorber for loose or wear; Steering
linkage section, horizontal, straight or redirect or assembly for loose;
Spring steel, U bolt clamping bolt for loose or damage; The Angle is
correct; Tire pressure is correct. Except by high-speed put head to
check the contents of the project, especially emphasize the check to the
top of the following: tire pressure is correct; Steering knuckle
bearing ever loose; To horizontal, straight linkage section ever loose;
If there's any loose for steering gear assembly; Spring steel, U bolt
clamping bolt for loose or damage; Spring plate whether residual
deformation.

About maintenance the car is the best way is often checked the car; you
will find problems early and avoid unnecessary losses. Here we recommend
some car diagnostic tools can help you test your car by yourself, such as: Launch X431 IV, Launch X-431 PAD, Launch X431 Pro3, Autel MaxiSys MS908, Launch X-431 PADII and so on.
Source: http://www.focalobd.com/blog/automotive-steering-system-fault-faqs/
Posted by: obdtools at
06:45 AM
| No Comments
| Add Comment
Post contains 392 words, total size 5 kb.
35 queries taking 0.0276 seconds, 57 records returned.
Powered by Minx 1.1.6c-pink.








