Automobile shock absorber is mounted on an automobile chassis parts, it is used to shock absorption, simply put, is in the car through the rugged road, shock absorbers allows occupants to reduce the bumpy feeling, also can effectively keep the car running smooth. Automobile shock absorber is also have the use fixed number of year, use after a period of time may fail, you can use Auto Diagnostic Tool to check the performance of automotive shock absorbers, following will teach you how to check the car shock absorber the working conditions.

To determine if there is no damage automotive shock absorbers have a good way, that is in the ground at low speed, and then brakes, if you feel the car shake very badly, that's the shock absorber problem, or when driving in uneven road , the body feels a strong sense of bumps, it is also possible that poor shock absorber effect. In this case should go to the 4S shop, using Launch X431 IV GX4 or Launch X431 GDS professional tools overhauled.

If you want to check the shock absorber, we can first and the lower end of the shock absorber fixed in a vise, with hand drawing compressed several times, the normal shock absorber should have certain damping force, and to the tensile resistance should be greater than the compression resistance. If the unstable or no resistance may shock absorber lack of oil or damaged parts, should overhaul or replacement parts.

If only one side of the shock absorber to fail, it is suggested that the two sides of the change together, it is no use in a separately. Change is the need to use Autel AutoLink AL439 or Autel AutoLink AL609 tool to check, one can check whether automobile shock absorber has a good working, by hand Press a few bumper car, if the car can play two or three times, the automobile shock absorber works very well.

Source: http://www.focalobd.com/blog/how-to-check-the-working-condition-of-automobile-shock-absorber/

Posted by: obdtools at 03:17 AM | No Comments | Add Comment
Post contains 334 words, total size 4 kb.