July 01, 2015
In the big city in the congestion of the car, the vehicle before and
after the gap is basically less than one meter, and the slope of the
overpass is very large, parking brake is particularly important.
However, due to various reasons, the handbrake will appear when no use.
In the daily inspection and maintenance of the vehicle, don't forget to
use Auto Diagnostic Tool to check the performance of regular handbrake.

First, determine the operating position of the handbrake lever.
Generally, when the handle is pulled three-quarters of the entire trip,
the hand brake system should be in a normal brake position. Should first
find out the work point, the general 5~7 case is normal position. Then
check the brake mechanism efficiency, also is have a look handbrake to
work effectively. The car drove up to the steep, good road conditions of
the slope, step on the brake pedal, the neutral gear, pull the hand
brake handle to just to determine the position of. Slowly loosen the
brake pedal, if the car did not happen sliding, that means the hand
brake performance is good.
Check the handbrake sensitivity, since
it is very important to the slope. On flat roads slow driving, slowly
pulling handbrake handle and feel the sensitivity and the junction of
the handle. If it is found that the brake braking efficiency or
sensitivity is not ideal, can regulate the handbrake thread through Launch X431 PAD or Launch X431 GDS tools to solve.
Adjust the hand brake wire. If found in the test the brake is not
sensitive, can be solved by adjusting the handbrake arrows, below the
hand brake handle with an adjustable compensation institution. Adjust
the need to remove the handle decoration cover first, then use tools to
adjust the length of stay, in order to ensure the hand brake is in the
best working state.
Ordinary driving, the handbrake usage is very high, but the handbrake is not universal insurance, its performance will decline with the increase of using the number of times. Most of the time, because the system failure or improper use and don't effect, this is also the major hidden danger of the accident, so owners should regularly use the Autel Maxidiag Elite MD701 or Autel MaxiDiag Elite MD802 tools maintenance check handbrake.
Source: http://www.focalobd.com/blog/regular-maintenance-and-check-car-handbrake/
Posted by: obdtools at
03:16 AM
| No Comments
| Add Comment
Post contains 390 words, total size 5 kb.
35 queries taking 0.0565 seconds, 57 records returned.
Powered by Minx 1.1.6c-pink.








